Classroom Documentation

Turning On (Dell)

If there is no light coming from the indicator on the circle power button.

1. Push the button once, then wait for the light to turn orange and white.

2. The monitor will show the Dell logo as it starts up.

    

Turning On (HP)

If there is no light coming from the indicator on the circle power button.

1. Push the button once, then wait for the light to turn orange and white.

2. The monitor will show the HP logo as it starts up.

    

Turning On (Lenovo)

If there is no light coming from the circle power button.

1. Push the button once, then wait for the light to turn orange and white.
2. The monitor will show the Lenovo logo as it starts up.

Using the Lapel Microphones

Hold both tabs sticking out from the side of the lapel. 

1. Open it and take the rechargeable battery out of the station, then place it into the lapel microphone. 
2. Double check to make sure you are matching the positive and negative charges similar to regular alkaline batteries.
3. After placing the batteries in the lapel just close the tab and turn on the device.

Keypad Control: 

Small rooms have a keypad that controls the different sources you can switch to in the rooms. You can also control the volume and power on the AV system all from this device.

Touch Panel Control: 

This is an interactive touch screen that is the same as the keypad but with more options. This is the central control for all the sources you can switch to in the room.

Troubleshooting Audio

1. Ensure that the correct microphone and speakers are set by clicking the arrow next to the microphone while in a Zoom meeting.
2. Choose “DVX” as speaker, and “Realtek Audio or Same as System” as microphone.
3. If you wish, you can click “Test Speaker & Microphone” to ensure the settings are correct.

*Note: The exact name of device may vary from room to room, make sure to test speaker and microphone to ensure the correct devices are selected